One of the reasons that oil is being burnt in the engine of your car is because your oil pump’s function may not be doing its job sufficiently. Oil pumps are connected to oil pressure sensors, which send oil pressure readings to the oil-level gauge on the dashboard. When the oil pump is at full capacity, oil levels will be at or above the maximum mark on the oil-level gauge-above 75%.

If your oil level drops below 75% for an extended time period, it can indicate a potential problem with your oil pump.

You can increase oil pump capacity with synthetic oil which offers increased lubrication properties and increased viscosity, providing better lubricant flow in hot engines. With added protection against high-temperature oil breakdown, oil pressure increases are seen under all oil temperatures.

oil change modesto ca is a procedure that will ensure your oil levels are at their optimal levels. Though you can try and do oil changes on your own, it would be smart to leave the job to professionals who have done oil changes many times before. The first step of oil change is to remove the oil dipstick and wipe off any oil on the dipstick.

Next you need to remove the oil filler cap, oil drain plug and oil filter. The oil filter should be disposed of properly because oil filters are not biodegradable. You can dispose of the oil filter with other hazardous household products at your local recycling center or landfill. Once you have removed all these items it is time to fill up your oil filter with oil. This is the only oil related step you need to do yourself. Once oil has filled up the oil filter you can install the oil filter and tighten it until hand tight. You should not over tighten oil filters because this will cause your engine problems in the long run.

The last step of oil change is to fill up new oil into the oil tank or whatever oil storage you have for oil. You must pay attention to the oil capacity so you don’t overfill oil. After oil level is at its optimal point, replace the oil cap and dipstick. Make sure oil levels are in their optimal levels by checking oil levels once again after your car has been idle for about one minute.

Learn more from https://en.wikipedia.org/wiki/Motor_oil